top of page

The next generation of power storage is here! These LiFePO4 batteries weigh less than half of their Lead Acid counterparts. They may look fairly similar to lead acid batteries, but internally they’re a totally different, next generation concept. They’re actually made up of regular prismatit LiFePO4 cells, which are in mass production for many portable devices. An internal battery management system (BMS) ensures all cells are uniformly charged and discharged, as well as providing short circuit, over current, and reverse polarity protection. This provides you with a higher degree of protection than a traditional lead acid battery which is unprotected, and can discharge rapidly under short circuit conditions, causing fire and damage. The internal BMS will also limit discharge and manage cut-off voltage, to further protect the internal cells. 

This 100Ah model can provide continuous current up to 50A, with peaks of up to 100A. It’s not suitable for a primary vehicle starting battery, however is absolutely perfect for house batteries, backup batteries, and virtually any other application where you would typically use a large lead acid / AGM battery. 


DC Voltage : 12.8V
Width : 325mm
Height : 220mm
Depth : 170mm
Weight : 10kg

12.8V 100Ah Lithium Deep Cycle Battery

SKU: SB2215
Sales Tax Included
Only 1 left in stock
  • - Much lighter than Lead Acid and AGM Batteries
    - Robust LiFePO4 Cells
    - Excellent life span

  • Service Life: 10yrs+
    Cycle Life: 1500+ cycles (> 80% capacity retention)
    Nominal Voltage: 12.8V
    Cut-Off Voltage: 10V approx.
    Charge Type: Constant Current / Constant Voltage
    Discharge Current 50A
    Max Continuous Current ≤100A (5 sec)
    Internal Cells: Prismatic LiFePO4 
    Maximum Internal Resistance:  35M?
    Output Terminals: M8 Bolt Down
    Operating Temperature: 0-45°C (60°C max discharging)
    Operating Humidity: RH < 85%
    Storage Temperature: 0-40°C (15-25°C recommended)
    Storage Humidity: RH < 50%

Untitled design (11).png

Related Products